====== Welcome to the Projects page ======
Questions, comments etc. about these projects, can happen at [[https://3iii.dk/blog/2023/05/hiatus/|my blog space]]

**Projects Under Way:** (the June PCB production is done - and testing of the PCBs is happening)

  * [[cnc-grbl-uno-ver1|CNC-GRBL-UNO]] - a shield with [[https://www.aliexpress.com/w/wholesale-screw-terminals-3.5mm.html|screw terminals]], to be used with [[https://github.com/gnea/grbl|GRBL firmware]], and an [[https://store.arduino.cc/products/arduino-uno-rev3|Arduino UNO]] 
      * (ver.1 is in use - ver.2 ready and done)

  * [[cnc-xyz-keyboard|CNC-XYZ-keyboard]] - XYZ buttons for movements 0.1 - 1 - 10 - 100 mm, i each direction 
        * (ver.1 is being tested - ver.2 ready and done)

  * [[cnc-plc-opto8|CNC-PLC-Opto8]] - Optocoupler board/module with 2x 4-channel of input Opto-couplers
        * (ver.2 ready for PCB production)

  * [[arduino-breadboard-modules|Breadboard Modules]] - several modules for use with Arduino and Breadboards
      * (ToDo: upload PCB pictures of each ver.1)

  * [[arduino-blinky-shield-uno| Blinky Shield UNO]] - A Shield with 24 LEDs a LED for every pin of the [[https://store.arduino.cc/products/arduino-uno-rev3|Arduino UNO]] - or [[https://www.adafruit.com/product/3382|Metro M4]] 
     * (ver.4 - rev.C1 and rev.D1 ready and done)

  * [[lab-Power-supply-5D|Lab Power supply 5x]] - 5x fixed voltages (3V3, 5V, 7V5, 12V, 24V) - model 5D 
      * (ToDo: upload ver.3 PCB pictures, and pictures of previous (used for years) iterations)

  * [[wemos-d1-mini-esp8266|Wemos D1-Mini - ESP8266 - PCBs & Projects]] 
      * (ver.1 ready and done)

   * [[pwr40-p1|Power 30-40 Amp Plus-Side E-relay]] 
     * (ver.1 ready and done)

**Completed Projects:**

  * ToDo


Trademarks:

* [[https://www.arduino.cc|Arduino® is a trademark of Arduino SA]]

Other: 
   * [[sv-seeker-issue-comment|SVseeker issue comment]]